Jevries V2 Ultra Fast Superpumps Servo-YT9935469

Description

The BEST HOPPER SERVO in the Game only got Better with a NEWLY developed Ultra Fast brushless motor to make your RC Lowrider hit harder than ever before!The ULTRA FAST pro-series Superpump has a crazy amount of speed and torque of43KG 0.055sec at 8.4V and can be used as 12V as well without running hot.The NEWLY Developed ULTRA FASTBrushless motor delivers ultra torque and highest durability, more efficiency for faster response. Extremely tough and durable.Build to Last.NOTE:- These super fast and strong servo’s are for EXPERIENCED users only!- Always adjust the endpionts first prior to connecting the links and mounting the servo horns to make sure there’s no binding (humming noise).For Best results you need the Jevries 20A BEC set at max. 9V and 3S lipo battery.Powered by AGFRC!Specs:Voltage: 7.4V- 8.4V (9V)Gears: Super Steel Pro GearsBearing: 3 HQ Ball BearingsOperating Temperature: -15C – +70CPulse / Frequency: 1520uS/ 333HzOperating Speed: 0.065sec/60 @ 7.4V 0.055sec/60 @ 8.4VStatic Holding Torque: 40kg-cm (556 oz-in) @ 7.4V 43kg-cm (598 oz-in) @ 8.4VSize: 40*20*37.2mm 1.57*78*1.46inchMotor Type: Super Brushless motorSpline: 25T/ Dead Band Width 2uSecHere’s some pointers for Best performance:- Set endpoints at 50%-50% WITHOUT the servo horn(s) on. When done mount the servo horns and connect the levers and set the endpoints so that the servo(s) don’t bind.- Use the third hole (20mm) on the Jevries servo horn this creates a nice balance between speed and torque.- For single servo setup mount the servo with servo horn facing forward and use the third hole (20mm) of the Jevries servo horn.- For best results on a double servo setup I suggest to use RC Hop Shop aluminum double servo mount. Mount the servo’s upside down in the mount as shown in the picture.- For best hopping you either need to use a shaved driveshaft or neutral mod.- Use a good set of medium/stiff shocks to make sure the car doesn’t bottom out.